Tire size comparison

285/75R16 vs 315/75R16

A 315/75R16 is 1.77 in (5.4%) taller than a 285/75R16 and 30 mm (1.18 in) wider. Both fit 16-inch wheels, so the whole height difference comes from the sidewall, which is 0.89 in taller on the 315/75R16. At +5.4% this is outside the ±3% guideline many tire retailers use, and the speedometer would show 60 mph at a real 63.2 mph unless it is recalibrated. Ground clearance under the axles changes by about +0.89 in, and the tire turns 31 fewer times per mile (614 vs 583).

Size by size

285/75R16315/75R16Difference
Overall diameter32.83 in (834 mm)34.60 in (879 mm)+1.77 in (+5.4%)
Section width11.22 in (285 mm)12.40 in (315 mm)+1.18 in (+10.5%)
Sidewall height8.42 in (214 mm)9.30 in (236 mm)+0.89 in (+10.5%)
Circumference103.14 in (2,620 mm)108.71 in (2,761 mm)+5.57 in (+5.4%)
Revolutions per mile614583−31
Rim diameter16 in16 insame

Inch equivalents: 285/75R16 ≈ 32.8x11.2R16, 315/75R16 ≈ 34.6x12.4R16.

Open in the interactive comparison →

At a glance

315/75R16 vs 285/75R16+5.4%Outside ±3%
285/75R16 · 32.8 in315/75R16 · 34.6 in11.2 in12.4 inTread viewSide view

Drawn to scale from calculated dimensions. Left: side view; right: tread view. Dashed line marks the top of the taller tire.

Speedometer difference

With a speedometer calibrated for the 285/75R16, this is your real speed on 315/75R16 tires.

Speedometer showsActual speed with 315/75R16Difference
20 mph21.1 mph+1.1 mph
30 mph31.6 mph+1.6 mph
40 mph42.2 mph+2.2 mph
50 mph52.7 mph+2.7 mph
60 mph63.2 mph+3.2 mph
70 mph73.8 mph+3.8 mph
80 mph84.3 mph+4.3 mph

Fitment considerations

  • Width: the 315/75R16 is 1.18 in wider in section width, so each sidewall sits roughly 0.59 in further out on the same wheel. Check clearance at full steering lock against the upper control arm, frame and fender liner, and confirm your wheel width is inside the tire maker’s approved rim-width range for the 315/75R16.
  • Height: 1.77 in of extra diameter means about 0.89 in less space between the tread and the wheel well. Depending on the vehicle this can call for a leveling kit, a lift or trimming; check with a tire shop or with owners of your exact model.
  • Speedometer and gearing: a 5.4% diameter change is worth recalibrating for. The effective axle ratio changes by the same percentage; see what it does to your RPM with the gear ratio calculator.
  • Ride and handling: a taller sidewall generally gives more cushioning and flex, with slightly softer steering response.
  • Load rating: match or exceed the load index (and LT load range, if applicable) on your door placard. P-metric and LT tires of the same size are rated differently.

These checks are general; whether a size fits a particular vehicle depends on its suspension, wheels and body. Your door placard lists the approved original sizes, and a tire professional can confirm fitment.

How these numbers are calculated

Diameter = 2 × section width × aspect ratio ÷ 100 ÷ 25.4 + rim diameter (for inch sizes, the first number is the diameter). Revolutions per mile = 63,360 ÷ (π × diameter). Actual speed = indicated speed × 34.60 ÷ 32.83. Real tires vary by brand and model, so treat these as close estimates and use manufacturer specs for exact measurements.

Frequently asked questions

How much bigger is 315/75R16 than 285/75R16?

315/75R16 is 1.77 inches (5.4%) taller in overall diameter (32.83 in vs 34.60 in) and +1.18 inches in section width.

Will my speedometer be off with 315/75R16 instead of 285/75R16?

Yes, by about 5.4%. If the speedometer is set up for 285/75R16, it will show 60 mph when you are really going about 63.2 mph.

Is 315/75R16 within 3% of 285/75R16?

No. The diameter difference is +5.4%. Check clearance and consider recalibrating the speedometer.

Check before you buy. Results are calculated from size codes and standard formulas; real tires vary by brand and model. Always check your vehicle placard and owner’s manual for approved sizes and load ratings, and ask a tire professional about fitment and clearance.